|
THRUSTER MOLE
|
|
|
25 degree thrust angle for maximum pulling power with a forward jet to bore through obstructions.
Pattern: 1 forward, 3 to 6 rear jets
|
|
FLUSHER MOLE
|
|
|
45 degree Flushing angle with good pulling power. Good general purpose cleaning nozzle.
Pattern: 6 to 12 rear jets
|
|
BN MONSTER MOLE
|
|
|
A general purpose dual angle nozzle combining the forces of both thrust and flush for superior pulling and cleaning power.
Pattern: 1 forward, 2 to 3 rear jets @ 45 degrees & 2 to 3 rear jets @ 25 degrees
|
|
BN CORNER MOLE
|
|
|
45 degree flushing angle combined with a 90 a degree side jet to assist nozzle through corners, etc.
Pattern: 1 side jet (90 degrees) & 3 to 6 rear jets
|
|
HIGH THRUST DEGREASER
|
|
|
25 degree thrusting angle for maximum distance and 3 forward jets at 10 degrees for loosening hard grease or ice. Can also be used for pushing debris forward.
Pattern: 3 forward jets @ 10 degrees & 6 to 12 rear jets
|
|
MEDIUM THRUST DEGREASER
|
|
|
35 degree penetrating angle with 3 forward jets for loosening hard grease or ice. Use for forward cleaning or pushing debris forward on short to medium length runs.
Pattern: 3 forward @ 10 degrees & 6 rear jets @ 35 degrees
|
|
FLUSHING DEGREASER
|
|
|
45 degree flushing angle with 3 forward jets for loosening hard grease or ice. Useful for pushing debris forward. Limited distance capabilities.
Pattern: 3 forward @ 10 degrees & 6 rear jets @ 45 degrees
|
|
ROTOR JET SPINNER
|
|
|
Rear jets provide pulling power and side jets provide side wall cleaning action. This pattern is standard for Sewer Squad Kits.
Pattern: 2 side jets @ 90 degrees & 2 rear jets @ 35 or 45 degrees
|
