THRUSTER MOLE

Description: Included in our Sewer Squad Kits, the Thruster has a 25 degree angle for maximum pulling power.   Use in a plugged line situation or for runs greater than 150 ft.

Pattern: 1 forward jet (optional), 3 to 6 rear jets

PENETRATOR MOLE

Description: 35 degree Penetrating angle with super pulling power.   Use in a plugged line situation or for runs between 100 to 150 ft.

Pattern: 1 forward jet (optional), 3 to 6 rear jets

FLUSHER MOLE

Description: Included in our Sewer Squad Kits, the Flusher has a 45 degree angle with good pulling power.   Use  for runs up to 100 ft.   A good general purpose cleaning nozzle.

Pattern: 1 forward jet (optional), 6 to 12 rear jets

SWEEPER MOLE

Description: 55 degree Sweeping angle, pulling similar power as Flusher mole, but offers wider angle for sweeping lines clean.

Pattern: 1 forward jet (optional), 6 to 12 rear jets

CORNER MOLE

Description: 45 degree Flushing angle combined with a 90 degree side jet to assist nozzle through corners, etc.

Pattern: 1 forward jet (optional), 1 side jet @ 90 degrees & 3 to 6 rear jets

MONSTER MOLE

Description: A dual angle nozzle combining the forces of both thrust and flush for superior pulling and cleaning power.

Pattern: 1 forward (optional), 2 to 3 rear jets @ 45 degrees  & 2 to 3 rear jets @ 25 degrees